We offer comprehensive pump repair services; we are capable of repairing all types of pumps
From simple boxed ones to complex multistage pumps, our team of skilled technicians has extensive experience in repairing pumps, and we understand the importance of timely and efficient pump repairs to prevent costly downtime.
Our team has decades of experience in repairing all types of pumps and rotating equipment. That’s why we take a thorough and systematic approach to our repair process. Our technicians use advanced diagnostic tools to identify the root cause of any issues and provide the best solutions to meet your needs. We pride ourselves on using only high-quality replacement parts and materials, ensuring that you receive the most reliable and cost-effective repair possible.
The first step in our pump repair process is disassembly, where the pump is carefully taken apart and each component is inspected for damage or wear.
During this step, all parts are thoroughly inspected, and any damaged or worn parts are repaired or replaced. We have the knowledge and tools needed to quickly identify any problems and provide the best possible solutions.
After all parts have been repaired or replaced, the pump is reassembled and tested to ensure that it is functioning correctly. Our comprehensive testing procedures help to ensure that the pump will operate reliably and efficiently once it is back in service.
Our seal conversion services allow your packed pumps to be upgraded to mechanical seals
Keeping your pumps running efficiently and effectively is important. One of the ways we can help you achieve this is through seal conversion on packed pumps.
Upgrading your packed pump to a mechanical seal offers several advantages, including increased reliability, reduced maintenance costs, and improved performance.
By converting your packed pump, you will experience less downtime, which translates to increased productivity and profitability.
We ensure you receive reliable, long-lasting motor repair and rewinding services
Our approach to motor rewinding involves a thorough analysis of the motor’s condition to determine the most appropriate repair solution that ensures optimal performance and longevity.
This involves a thorough examination of pumps, compressors, and other equipment to ensure optimal performance and longevity. By conducting these assessments, we can help you identify any inefficiencies or potential problems that could lead to costly downtime or equipment failure. It also enables you to make informed decisions about maintenance, repair, or replacement of equipment.
Motor rewinding can be a more cost-effective solution than purchasing a new motor, particularly for larger and more complex motors. This is especially true when the motor in question is no longer available or has unique specifications that make a replacement motor difficult to source.
When a motor fails, the downtime can be costly for businesses that rely on that equipment for their operations. Motor rewinding can be a faster solution than waiting for a replacement motor to be sourced, delivered, and installed, helping to reduce overall downtime.
By rewinding the motor with the appropriate materials and techniques, the electrical resistance and other factors that affect efficiency can be optimized, resulting in energy savings and a longer lifespan for the motor.
Babbitt Bearings Repair
Precision machining is a critical aspect of rotary equipment repair
From shafts and bearings to gears and housings, our precision machining capabilities enable us to restore all types of rotary equipment to their optimal condition.
Our team is well-versed in the latest installation and removal techniques, ensuring that the pump is installed or removed safely and without causing any damage to the surrounding equipment. Our goal is to provide you with a seamless experience, from start to finish, and to ensure you have a reliable and efficient pump system in place.
he first step in precision machining is to thoroughly inspect the equipment to identify any defects or issues that need to be addressed. This step involves measuring the equipment to determine the extent of the damage and assessing the overall condition of the equipment.
Once the equipment has been inspected and assessed, the next step is to machine the damaged or worn components. This step involves using precision tools and techniques to remove any defects or damage and restore the components to their original specifications.
The final step in precision machining is to perform quality control and testing to ensure that the equipment meets the necessary specifications and is functioning properly. This step involves testing the equipment to ensure that it is operating within acceptable tolerances and performing as expected.
We offer a wide range of aftermarket parts that meet or exceed OEM standards
Our ability to procure aftermarket parts and products is a crucial component of our commitment to providing top-quality fluid handling solutions to you. Many industries rely heavily on fluid handling systems to operate efficiently, and any disruption or downtime can lead to significant losses in productivity and revenue.
By offering a comprehensive selection of aftermarket parts and products, we can help you quickly and easily replace or repair components that may fail or require maintenance over time, ensuring that your operations remain up and running with minimal interruptions.
Our fabrication capabilities enable us to precisely machine components
Our experienced technicians utilize a range of fabrication techniques, including welding, machining, and custom fabrication, to ensure that all components of the rotating equipment are accurately repaired or replaced.
Our team is well-versed in the latest installation and removal techniques, ensuring that the pump is installed or removed safely and without causing any damage to the surrounding equipment. Our goal is to provide you with a seamless experience, from start to finish, and to ensure you have a reliable and efficient pump system in place.
With our ability to custom fabricate parts, we can replace damaged or worn parts with higher-quality, longer-lasting materials. This leads to increased equipment life and less downtime for repairs.
When custom fabrication is required, we have the necessary equipment and expertise to reduce downtime by providing faster turnaround times. This can result in less lost production time and higher overall efficiency.
Custom fabricating parts can be a more cost-effective solution than replacing an entire piece of equipment. Additionally, we can often find ways to make parts more efficiently or use different materials to increase quality.
We can reverse engineer replacement parts that fit perfectly and perform as intended
Having the ability to recreate older parts that are no longer available can save you both time and money, as you don’t need to replace entire systems or machines.
Technologies like the Faro Arm allow for highly precise measurements to be taken, making sure that the newly created part is as good, if not better than the original. This technology also helps to increase the lifespan of the equipment, as replacements can be made quickly and efficiently.
Our team is highly skilled in reverse engineering and has access to the latest technologies to ensure that you receive the highest quality aftermarket parts.
We provide high-quality sandblasting and coating services
We ensure that your pump components are well-protected and ready to operate efficiently.
Our team is well-versed in the latest installation and removal techniques, ensuring that the pump is installed or removed safely and without causing any damage to the surrounding equipment. Our goal is to provide you with a seamless experience, from start to finish, and to ensure you have a reliable and efficient pump system in place.
Sandblasting is an effective method to remove old coatings, rust, and other contaminants from the surface of your equipment, which prepares it for the coating process. The new coating adheres better to the prepared surface, providing better corrosion protection and longer service life.
Coatings applied after sandblasting offer excellent protection against corrosion, which is a significant issue in many industries. The coating acts as a barrier to prevent moisture and other corrosive agents from attacking the equipment’s surface, thereby extending its service life.
By removing any built-up debris or corrosion, the equipment can function more smoothly and efficiently. Additionally, applying a new coating can help reduce friction, which can improve overall performance and reduce wear and tear on the equipment over time.
We provide on-site field and emergency services
We understand that equipment breakdowns can occur at any time and can be costly in terms of downtime and lost productivity. Our experienced technicians are available 24/7 to provide on-site support and repair services, ensuring that your equipment is back up and running as quickly as possible.
We also provide comprehensive testing and commissioning services to ensure that the pump is operating at optimal performance levels once it’s installed.
dynamic balancing is essential to maintaining the equipment’s integrity and longevity
Dynamic balancing involves identifying and correcting any imbalances in the rotating components of the equipment, which can cause excessive vibration, premature wear and tear, and in extreme cases, catastrophic failure.
Our team is well-versed in the latest installation and removal techniques, ensuring that the pump is installed or removed safely and without causing any damage to the surrounding equipment. Our goal is to provide you with a seamless experience, from start to finish, and to ensure you have a reliable and efficient pump system in place.
This involves taking measurements of the rotating equipment, such as the vibration, and using these measurements to determine the amount and location of any imbalances.
Once the imbalances have been identified, corrective action is taken to balance the equipment. This could include adding or removing weight, adjusting alignment, or other methods depending on the specific equipment.
After the balancing has been completed, a final verification is done to ensure that the equipment is now within acceptable levels of vibration and other measurements. This could involve further testing or measurements to confirm the effectiveness of the corrective action taken.
Folsom Industrial is a Utah-based company that specializes in repairing rotating equipment, providing exceptional service and expertise to customers in need.
At Folsom Industrial, we understand the importance of emergency repairs and the impact they can have on your operations. That’s why we prioritize prompt response times and always aim to find the best solution to achieve a positive outcome. We are committed to excellence in everything we do, from our skilled technicians to our state-of-the-art equipment, and we strive to exceed expectations with each and every repair.
Our plant surveys and technical proposals are free so give us a call and let us help you make those changes today.
Please provide your name, email, and a brief description of the equipment you would like to discuss and we will get back to you within 24 hours of receipt.
Folsom Industrial has evolved as a leading solution provider to many industries that rely on quality products and services.
Careers
If you are looking to join a dynamic team where you will be valued, please submit your resume.